HT761X
General Purpose PIR Controller
Features
• • • • • •
Stand-by current: 100µA (Typ.) On-chip regulator Adjustable ...
HT761X
General Purpose PIR Controller
Features
Stand-by current: 100µA (Typ.) On-chip
regulator Adjustable output duration CDS input 40 second warm-up ON/AUTO/OFF selectable by MODE pin
Override function Auto-reset if the ZC signal disappears over 3 seconds Operating voltage: 5V~12V 16 pin DIP or SOP packaging
Applications
PIR light controllers Motion detectors
Alarm systems Auto door bells
General Description
The HT761X is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, control circuit, a voltage
regulator, a system oscillator, and an output timing oscillator. Its PIR sensor detects infrared power variations induced by the motion of a human body and transforms it to a voltage variation. If the PIR output voltage variation conforms to the criteria (refer to the functional description), the lamp is turned on with an adjustable duration. The HT761X offers three operating modes (ON, AUTO, OFF) which can be set through the MODE pin. While the chip is working in the AUTO mode the user can override it and switch to the TEST mode, or manual ON mode, or return to the AUTO mode by switching the power switch. The chip is enclosed in a 16 pin DIP/SOP.
Selection Table
Part Number ZC off/on for override
2 times 1 time
Fla...