2x 40 Channel LCD Driver
HT1609L 2×40 Channel LCD Driver
Features
• • •
Operating voltage: 2.7V~5.2V Bias voltage: static~1/5 bias LCD driving v...
Description
HT1609L 2×40 Channel LCD Driver
Features
Operating voltage: 2.7V~5.2V Bias voltage: static~1/5 bias LCD driving voltage: 3.0V~5.0V
2×40 internal LCD drivers available LCD driver with serial/parallel conversion function
Applications
Electronic dictionaries Portable computers
Remote controllers Calculators
General Description
The HT1609L is an LCD driver LSI with 2×40 output channels using CMOS technology. It is equipped with two sets of 40-bit bidirectional shift registers, 40-bit data latches, 40-bit LCD drivers, and logic control circuits. The HT1609L can convert serial data received from an LCD controller into parallel data and send out LCD driving waveforms to the LCD panel. The HT1609L is designed for general purpose LCD drivers. It can drive both static and dynamic drive LCDs. The LSI can be used as segment driver.
Block Diagram
1
25th Aug ’98
HT1609L
Pin Assignment
2
25th Aug ’98
HT1609L
Pad Assignment
Chip size: 162 × 102 (mil)2 * The IC substrate should be connected to VDD in the PCB layout artwork.
3
25th Aug ’98
HT1609L
Pad Coordinates
Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 X –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –75.27 –70.34 –65.49 –60.65 –55.80 –50.96 –46.11 –41.27 –36.42 –31.58 –26.73 –21.89 –17.04 –12.20 –7.35 –2.51 2.34 7.18 12.03 16.87 21.72...
Similar Datasheet