AM26LS31

Order this document by AM26LS31/D Quad Line Driver with NAND Enabled Three-State Outputs The Motorola AM26LS31 is a quad differential line driver intended for digital data transmission over balanced lines. It meets all the requirements of EIA–422 Standard and Federal Standard 1020. The AM26LS31 provides an enable/disable function common to all four drivers as opposed to the split enables on the MC3487 EIA–422 driver. The high impedance output state is assured during power down. Full EIA–422 Standard Compliance AM26LS31 QUAD EIA–422 LINE DRIVER WITH THREE–STATE OUTPUTS SEMICONDUCTOR TECHNICAL DATA Single + 5.0 V Supply Meets Full VO = 6.0 V, VCC = 0 V, IO Output Short Circuit Protection t 100 µA Requirement D SUFFIX PLASTIC PACKAGE CASE 751B (SO–16) Complementary Outputs for Balanced Line Operation High Output Drive Capability Advanced LS Processing PNP Inputs for MOS Compatibility PC SUFFIX PLASTIC PACKAGE CASE 648 Representative Block Diagrams PIN CONNECTIONS Non–Inverting Input Input A Outputs A 3 Enable Outputs B 6 Input B Gnd TRUTH TABLE Input H L X Control lnputs (E/E) H/L H/L L/H Non–Inverting Output H L Z Inverting Output L H Z 7 8 4 5 14 Outputs D 13 12 11 Outputs C 10 9 Input C Enable 1 2 Inverting Enable Output Controls Enable 16 15 VCC Input D Outputs ORDERING INFORMATION Device AM26LS31PC MC26LS31D* © Motorola, Inc. 1995 Operating Temperature Range TA = 0 to +70°C Package Plastic DIP SO–16 L = Low Logic State H = High Logic State X =...