AT10-0019-TB

PIN Diode Based Variable Attenuator, 50 - 1000 MHz V 5.00 AT10-0019 Features n n n n n n SOW-16 High Dynamic Range: 42dB Typical Flat Attenuation vs. Frequency High P1dB Compression Operates on a Single +5V Supply: SOW-16, Wide Body Package 50 Ohm Nominal Impedance Description M/A-COM's AT10-0019 is a Voltage Controlled PIN diode based π attenuator packaged in a low cost, 16 lead wide body plastic SMT package. The PIN diode design makes this part well suited for applications where low distortion or high linear operating power levels are required. These attenuators are ideal for gain control in multi-channel digital communications systems. Absolute Maximum Ratings 1 Parameter Max. Input Power 50 - 500 MHz 500 - 1000 MHz Voltages VCC Control Voltage Operating Temperature Storage Temperature Absolute Maximum +24 dBm +30 dBm -1 V to +7.0 V -1 V to +15 V -40°C to +85°C -65°C to +125°C Package outline conforms to JEDEC standard MS-013AA. 1. Operation of this device above any one of these parameters may cause permanent damage. Electrical Specifications2: TA = 25°C Parameter Insertion Loss Dynamic Range Attenuation Flatness VSWR Trise, Tfall Ton, Toff Transients 1 dB Compression Input IP3 Test Conditions Vcont.: +10 V Vcont.: 0 V Attenuation: 0 to 20 dB Attenuation: 20 to 30 dB Vcont.: 0 - 10V 10%/90%, 90%/10% 50% Cntl to 90%/10% RF In-band Vcont.: 0 - 10V Frequency 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz — Units dB dB dB dB Ratio µS µS mV dBm d...