Geode CS9210 Graphics Companion DSTN Controller
Geode™ CS9210 Graphics Companion DSTN Controller
April 2000
Geode™ CS9210 Graphics Companion DSTN Controller
General D...
Description
Geode™ CS9210 Graphics Companion DSTN Controller
April 2000
Geode™ CS9210 Graphics Companion DSTN Controller
General Description
The CS9210 graphics companion is suitable for systems that use either the GXLV or GXm processor along with the CS5530 I/O companion; all members of the National Semiconductor® Geode™ family of products. The CS9210 converts the digital RGB output stream to the digital graphics input stream required by most industry standard DSTN color flat panel LCDs. It can drive all standard DSTN flat panels up to a 1024x768 resolution. The system connection example shows how the CS9210 interfaces with the rest of the system components.
2X display refresh modes, up to 120 Hz Supports most SVGA DSTN panels and the VESA FPDI (Flat Panel Display Interface) Revision 1.0 Specification TFT panel support provided by use of one connector; allows a pass-through mode for the digital pixel input Programmable frame rate modulation (FRM), up to 32 levels Programmable dither, up to 16 levels Supports EDO memory, 16-bit interface Configuration via a serial programming interface Low-power, 3.3V operation 144-pin LQFP (Low-profile Quad Flat Pack)
Features 18-bit color support for digital pixel input 65 MHz pixel clock operation supports up to 1024x768
panels
Simultaneous CRT and DSTN display with up to 75 Hz refresh rate
Geode™ CS9210 System Connection Example
Pixel Data
18
Geode™ GXm or GXLV Processor
Pixel Port
24
Addr Control
13 16 13 16
Geo...
Similar Datasheet