CS7054
CS7054
Low Side PWM FET Controller
Description
The CS7054 is a monolithic integrated circuit designed primarily ...
CS7054
CS7054
Low Side PWM FET Controller
Description
The CS7054 is a monolithic integrated circuit designed primarily to control the rotor speed of permanent magnet, direct current (DC) brush motors. It drives the gate of an N channel power MOSFET or IGBT with a user-adjustable, fixed frequency, variable duty cycle, pulse width modulated (PWM) signal. The CS7054 can also be used to control other loads such as incandescent bulbs and solenoids. Inductive current from the motor or solenoid is recirculated through an external diode. The CS7054 accepts a DC level input signal of 0 to 5V to control the pulse width of the output signal. This signal can be generated by a potentiometer referenced to the onchip 5V linear
regulator, or a filtered 0% to 100% PWM signal also referenced to the 5V
regulator. The IC is placed in a sleep state by pulling the CTL lead below 0.5V. In this mode everything on the chip is shut down except for the on-chip
regulator and the overall current draw is less than 275 µA. There are a number of on-chip diagnostics that look for potential failure modes and can disable the external power MOSFET.
Features
s 200 mA Peak PWM Gate Drive Output s Patented Voltage Compensation Circuit s 100% Duty Cycle Capability s 5V, ± 3% Linear Reg. s Low Current Sleep Mode s Overvoltage Protection s Over Current Protection of External MOSFET / IGBT s Output Inhibit
Application Diagram
Package Options
MOT+
14 Lead PDIP
VBAT 42.5mH RS 51 1000mF 1000mF OUTPUT VCC Gnd PGnd FL...