CS5112
CS5112
1.4A Switching Regulator with 5V, 100mA Linear Regulator with Watchdog, RESET and ENABLE
Description
The ...
CS5112
CS5112
1.4A Switching
Regulator with 5V, 100mA Linear
Regulator with Watchdog, RESET and ENABLE
Description
The CS5112 is a dual output power supply integrated circuit. It contains a 5V ±2%, 100mA linear
regulator, a watchdog timer, a linear output voltage monitor to provide a Power On Reset (POR) and a 1.4A current mode PWM switching
regulator. The 5V linear
regulator is comprised of an error amplifier, reference, and supervisory functions. It has low internal supply current consumption and provides 1.2V (typical) dropout voltage at maximum load current. The watchdog timer circuitry monitors an input signal (WDI) from the microprocessor. It responds to the falling edge of this watchdog signal. If a correct watchdog signal is not received within the externally programmable time, a reset signal is issued. The externally programmable active reset circuit operates correctly for an output voltage (VLIN) as low as 1V. During power up, or if the output voltage shifts below the regulation limit, RESET toggles low and remains low for the duration of the delay after proper output voltage regulation is restored. Additionally a reset pulse is issued if the correct watchdog is not received within the programmed time. Reset pulses continue until the correct watchdog signal is received. The reset pulse width and frequency, as well as the Power On Reset delay, are set by one external RC network. The current mode PWM switching
regulator is comprised of an error amplifier with selecta...