Clock Driver
a
GENERAL DESCRIPTION
Clock Driver AD246
AD246 SPECIFICATIONS (Typical @ 25∞C and VS = 15 V, unless otherwise noted.)
...
Description
a
GENERAL DESCRIPTION
Clock Driver AD246
AD246 SPECIFICATIONS (Typical @ 25∞C and VS = 15 V, unless otherwise noted.)
The AD246 is a compact, inexpensive clock driver that can be used to obtain the required clock from a single 15 V supply. The circuit shown in Figure 1 (essentially an AD246) can operate at least 32 AD204s at the rated minimum supply voltage of 14.25 V and one additional isolator can be operated for each 40 mV increase in supply voltage up to 15 V. A supply bypass capacitor is included in the AD246, but if many AD204s are operated from a single AD246, an external bypass connector should be used with a value of at least 1 mF for every five isolators used. Place the capacitor as close as possible to the clock driver.
180pF 1 2 3 49.9k⍀ 12 9 8 7 4 3 14 C RC R CD 4947B Q 10 2 4 6 5 6 TELEDYNE TSC426 15V IN914 7 5 IN914 CLKOUT + 1F 35V CLK AND PWR COM
Model OUTPUT* Frequency Voltage Fan Out POWER SUPPLY REQUIREMENTS Input Voltage Supply Current Unloaded Each AD204 Adds 1 mA Load on AD204 +VISO or –VISO Adds
AD246JY
AD246JN
25 kHz Nominal 25 kHz Nominal 15 V p-p Nominal 15 V p-p Nominal 32 max 32 max
15 V ± 5% 35 mA 2.2 mA
15 V ± 5% 35 mA 2.2 mA
0.7 mA
0.7 mA
*The high current drive will not support a short to ground. Specifications are subject to change without notice.
Figure 1. Clock Driver
AD246 Pin Designations
Pin (Y) 1 2 12 13
OUTLINE DIMENSIONS AD246JY Package
Dimensions shown in inches and (millimeters)
8.40 (0.330) MAX 25.30 (0.995) MAX
Pin ...
Similar Datasheet