AD7490

Data Sheet 16-Channel, 1 MSPS, 12-Bit ADC with Sequencer AD7490 FEATURES Fast throughput rate: 1 MSPS Specified for VDD of 2.7 V to 5.25 V Low power at maximum throughput rates 5.4 mW maximum at 870 kSPS with 3 V supplies 12.5 mW maximum at 1 MSPS with 5 V supplies 16 (single-ended) inputs with sequencer Wide input bandwidth: 69.5 dB SNR at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface, SPI/QSPI™/MICROWIRE™/ DSP compatible Full shutdown mode: 0.5 µA maximum 28-lead TSSOP and 32-lead LFCSP packages AEC-Q100 qualified for automotive applications APPLICATIONS Multichannel system monitoring Battery-powered equipment Power line monitoring Data acquisition, instrumentation, and process control GENERAL DESCRIPTION The AD7490 is a 12-bit high speed, low power, 16-channel, successive approximation ADC. The part operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 1 MSPS. The part contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 1 MHz. The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS, and conversion is also initiated at this point. There are no pipeline delays associated with the part. The AD7490 uses advanced design techniques to achieve very low power ...