a
FEATURES 4–20 mA, 0–20 mA Output Ranges Precalibrated Input Ranges:
0 V to 2 V, 0 V to 10 V Precision Voltage Referenc...
a
FEATURES 4–20 mA, 0–20 mA Output Ranges Precalibrated Input Ranges:
0 V to 2 V, 0 V to 10 V Precision Voltage Reference
Programmable to 2.000 V or 10.000 V Single or Dual Supply Operation Wide Power Supply Range: 4.5 V to 36 V Wide Output Compliance Input Buffer Amplifier Open-Loop Alarm Optional External Pass
Transistor to Reduce
Self-Heating Errors 0.002% Typ Nonlinearity
4–20 mA Transmitter AD694
FUNCTIONAL BLOCK DIAGRAM
PRODUCT DESCRIPTION The AD694 is a monolithic current transmitter that accepts high level signal inputs to drive a standard 4–20 mA current loop for the control of valves, actuators, and other devices commonly used in process control. The input signal is buffered by an input amplifier that can be used to scale the input signal or buffer the output from a current mode DAC. Precalibrated input spans of 0 V to 2 V and 0 V to 10 V are selected by simple pin strapping; other spans may be programmed with external resistors.
The output stage compliance extends to within 2 V of VS and its special design allows the output voltage to extend below common in dual supply operation. An alarm warns of an open 4–20 mA loop or noncompliance of the output stage.
Active laser trimming of the AD694’s thin film resistors results in high levels of accuracy without the need for additional adjustments and calibration. An external pass
transistor may be used with the AD694 to off-load power dissipation, extending the temperature range of operation.
The AD694 is the ideal build...