Low Noise Op Amp
Data Sheet
FEATURES
Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver
Wide supply...
Description
Data Sheet
FEATURES
Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver
Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback
Ease of Use Lower total noise (insignificant input current noise
contribution compared to current feedback amps) Low noise and distortion
2.5 nV/√Hz voltage noise @ 100 kHz 1.2 pA/√Hz current noise MTPR < −66 dBc (G = +7) SFDR 110 dB @ 200 kHz High speed 130 MHz bandwidth (−3 dB), G = +1 Settling time to 0.1%, 68 ns 50 V/μs slew rate High output swing: ±10.1 V on ±12 V supply Low offset voltage, 1.5 mV typical
APPLICATIONS
Receiver for ADSL, VDSL, HDSL, and proprietary xDSL systems
Low noise instrumentation front end Ultrasound preamps Active filters 16-bit ADC buffers
GENERAL DESCRIPTIONS
The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage ...
Similar Datasheet