AT78C1507

Features Operating Supply Range 3.0V to 3.6V Power Dissipation 1W Max Low-power Sleep Mode (<0.5 mW) RF Data Channel – Automatic Gain Control or Programmable Gain Mode – Wide Bandwidth VGA – VGA Accepts Inputs from 30–300 mV Peak-to-peak Differential (PPD), 60–600 mV PPD or 110–1100 mVPPD – Programmable Equalization via 7th-order Equiripple Filter with Programmable Symmetric Zeros – Programmable 5-to-1 Filter Cutoff Range – Data Slicer with DC Restore Circuit – Wide Frequency Range Clock Extraction – Frequency Synthesizer with Independent 7-bit M and 6-bit N Dividers, Better than 1% Resolution – Highly Programmable to Accommodate DVD (1–5X) and CD (6–30X) – Write Asymmetry Measurement for Adjusting Write-mode Power – Data Recovery Supports CLV, ZCLV, ZCAV Recording – Optional Internally-generated Timing for AGC and Timing Recovery Synthesizer Functions – Supports Wobble Clock Synthesis, Using Low-jitter PLL Servo Algebra and OPC Functions – 45 MHz Bandwidth for Differential Phase Tracking Detector – Land and Groove Detector for DVD RAM – Supports One Beam Push/Pull Tracking Output – Supports One Beam Differential Phase Tracking – Supports Three-beam Push/Pull Tracking Output, Using E, F, G, H – Focus Error Signal Output – Focus OK Signal – Track Crossing Detection – Mirror Signal Output – Wobble Detection for DVD RAM, DVD-RW, DVD-R – Detects Tracking Error OK – Provides Sample and Hold Functions for CD and DVD OPC – Formats Pre-pit Data, Using Raw Pre-pit Informat...