HD66107T
(LCD Driver for High Voltage)
Description
The HD66107T is a multi-output, high duty ratio
LCD driver used for large capacity dot matrix LCD
panels. It consists of 160 LCD drive circuits with
a display duty ratio up to 1/480: the seven
HD66107Ts can drive a 640 × 480 dots LCD
panel. Moreover, the LCD driver enables interfaces
with various LCD controllers due to a built-in
automatic generator of chip enable signals. Use of
the HD66107T can help reduce the cost of an
LCD-panel configuration, since it reduces the
number of LCD drivers, compared with use of the
HD61104 and HD61105.
Features
• Column and row driver
• 160 or 80 LCD drive circuits
• Multiplexing duty ratios: 1/100 to 1/480
• 4-bit and 8-bit parallel data transfer
• Internal automatic chip enable signal generator
• Internal standby mode
• Recommended LCD controller LSIs:
HD63645F, HD64645F, and HD64646FS
(LCTC), HD66840/HD66841 (LVIC), HD66850
(CLINE)
• Power supply voltage
— Internal logic: +5 V ± 10%
— LCD drive circuit: 14.0 to 37.0 V
• Operation frequency: 8.0 MHz (max.)
• CMOS process
• 192-pin TCP
Ordering Information
Type No.
Number of
Outputs
Outer Lead
Pitch (µm)
Material of Tape*2
HD66107T11
160
180
Kapton
HD66107T24
160
180
Upilex
HD66107T12
160
250
Kapton
HD66107T00
160
280
Kapton
HD66107T01
80
280 Kapton
HD66107T25
80
280 Kapton
Notes: 1. “Kapton” is a trademark of Dupont, Ltd.
“Upilex” is a trademark of Ube Industries, Ltd.
2. The details of TCP pattern are shown in “The Information of TCP.”
Note
12 perforated holes
8 perforated holes
