S-19680 Series
www.ablic.com © ABLIC Inc., 2016-2020
AUTOMOTIVE, 105°C OPERATION, HIGH SIDE SWITCH
WITH CURRENT MONITO...
S-19680 Series
www.ablic.com © ABLIC Inc., 2016-2020
AUTOMOTIVE, 105°C OPERATION, HIGH SIDE SWITCH
WITH CURRENT MONITOR
Rev.1.3_00
The S-19680 Series, developed by using CMOS technology, is a high side switch with the current monitor function. When the Pch output
transistor is turned on, voltage is supplied to the load connected to the OUT pin. Monitoring the current which flows from the VIN pin to the OUT pin by using two external resistors, the S-19680 Series limits the current so that it does not exceed the set value. Depending on the monitored current value, the S-19680 Series detects the short-circuit status or the open status of the load connected to the OUT pin, and outputs an alarm signal. In addition, the S-19680 Series has the ON / OFF circuit to control the Pch output
transistor's status, ON and OFF, and the thermal shutdown circuit to limit overheating. The hysteresis type or latch type can be selected for the thermal shutdown circuit.
ABLIC Inc. offers FIT rate calculated based on actual customer usage conditions in order to support customer functional safety design. For more information regarding our FIT rate calculation, contact our sales representatives.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product for these purposes, it is imperative to contact our sales representatives.
Features
Power supply voltage: Current consumption during operation: ON resistance: Limit current: Load short-circ...