TJA1054

TJA1054 Fault-tolerant CAN transceiver Rev. 4 — 3 August 2010 Product data sheet 1. General description The TJA1054 is the interface between the protocol controller and the physical bus wires in a Controller Area Network (CAN). It is primarily intended for low-speed applications up to 125 kBd in passenger cars. The device provides differential receive and transmit capability but will switch to single-wire transmitter and/or receiver in error conditions. The TJA1054T is pin and downwards compatible with the PCA82C252T and the TJA1053T. This means that these two devices can be replaced by the TJA1054T with retention of all functions. The most important improvements of the TJA1054 with respect to the PCA82C252 and TJA1053 are: Very low EME due to a very good matching of the CANL and CANH output signals Good EMI, especially in low power modes Full wake-up capability during bus failures Extended bus failure management including short-circuit of the CANH bus line to VCC ...