Shielded Power Inductors
Web page
Sample & buy
Tools & software
Support & FAQ
Document 892 -1
Shielded Power Inductors – SER80xx
• Two dif...
Description
Web page
Sample & buy
Tools & software
Support & FAQ
Document 892 -1
Shielded Power Inductors – SER80xx
Two different DCR / Isat versions to match the requirements of a wide variety of applications
Low DCR; excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS tin-silver over tin over nickel over phos bronze (pins 1 and 2); Matte tin over nickel over phos bronze (pin 3). Other terminations available at additional cost. Weight 0.86 – 1.0 g Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Fail...
Similar Datasheet