High Power PoE Signal Path Magnetics
Document 489 -1
High Power PoE Signal Path Magnetics
Isolation Transformer
Part Inductance2 DCR max3 Isolati...
Description
Document 489 -1
High Power PoE Signal Path Magnetics
Isolation Transformer
Part Inductance2 DCR max3 Isolation4 Irms5 number1 (µH) (Ohms) (Vrms) (A)
HPX2126L_ 850
0.24
1500
1.9
1. When ordering, please specify packaging code:
HPX2126LD Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (300 parts per full reel). B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR is for each winding. 4. Isolation is measured from primary to secondary of each transformer. 5. Current flowing through each secondary that causes a 20°C temperature rise from 25°C ambient 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Meets the current requirements of Gigabit PoE Plus. Open circuit inductance is ≥350 µH with a 22.5 mA d...
Similar Datasheet