Document
DISCRETE SEMICONDUCTORS
DATA SHEET
BGY61 CATV amplifier module
Product specification Supersedes data of February 1995 File under Discrete Semiconductors, SC16 1997 Apr 10
Philips Semiconductors
Product specification
CATV amplifier module
FEATURES • Excellent linearity • Extremely low noise • Silicon nitride passivation • Rugged construction • TiPtAu metallized crystals ensure optimal reliability. DESCRIPTION Hybrid amplifier module for CATV systems operating over a frequency range of 5 to 200 MHz at a voltage supply of +24 V (DC). The device is intended as a reverse amplifier for use in two way systems. QUICK REFERENCE DATA SYMBOL Gp Itot PARAMETER power gain total current consumption (DC) CONDITIONS f = 10 MHz VB = +24 V MIN. 12.5 − TYP. − 215 PINNING - SOT115J PIN 1 2 3 5 7 8 9 DESCRIPTION input common common +VB common common output
Side view
fpage
BGY61
PIN CONFIGURATION
1
2
3
8 5 7 9
MSA319
Fig.1 Simplified outline.
MAX. 13.5 230
UNIT dB mA
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL Vi Tstg Tmb RF input voltage storage temperature mounting base operating temperature PARAMETER − −40 −20 MIN. MAX. 65 +100 +90 UNIT dBmV °C °C
1997 Apr 10
2
Philips Semiconductors
Product specification
CATV amplifier module
CHARACTERISTICS Table 1 Bandwidth 5 to 200 MHz; Tmb = 30 °C; ZS = ZL = 75 Ω PARAMETER power gain slope cable equivalent flatness of frequency response input return losses output return losses composite triple beat CONDITIONS f = 10 MHz f = 5 to 200 MHz f = 5 to 200 MHz f = 5 to 200 MHz f = 5 to 200 MHz 22 channels flat; Vo = 50 dBmV; measured at 175.25 MHz 22 channels flat; Vo = 50 dBmV; measured at 55.25 MHz Vo = 50 dBmV; note 1 dim = −60 dB; note 2 dim = −60 dB; note 3 F Itot Notes 1. fp = 83.25 MHz; Vp = 50 dBmV; fq = 109.25 MHz; Vq = 50 dBmV; measured at fp + fq = 192.5 MHz. 2. Measured according to DIN45004B; fp = 35.25 MHz; Vo = Vp; fq = 42.25 MHz; Vq = Vo −6 dB; fr = 44.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 33.25 MHz. 3. Measured according to DIN45004B; fp = 187.25 MHz; Vo = Vp; fq = 194.25 MHz; Vq = Vo −6 dB; fr = 196.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 185.25 MHz. 4. The module normally operates at VB = +24 V, but is able to withstand supply transients up to +30 V. noise figure total current consumption f = 200 MHz MIN. 12.5 −0.2 − 20 20 − − − − − − − TYP.
BGY61
SYMBOL Gp SL FL S11 S22 CTB
MAX. 13.5 +1 ±0.2 − − −68
UNIT dB dB dB dB dB dB
Xmod
cross modulation
−
−
−61
dB
d2 Vo
second order distortion output voltage
− 67 64 −
− − − − 215
−72 − − 7 230
dB dBmV dBmV dB mA
DC value; VB = +24 V; note 4 −
1997 Apr 10
3
Philips Semiconductors
Product specification
CATV amplifier module
PACKAGE OUTLINE
BGY61
handbook, full pagewidth
13.8 max 8 3.8 max
27.2 max 10.2 4.15 3.85
9.2 max 8.8 min 20.8 max 12.7 1 2 3 0.25 2.54 4.15 3.85 UNC 6-32 (1) 5 7 8 0.51 0.38 (5.08) 25.4
MSA318 - 1
9
4.2 ∅ 0.25 M
(2)
2.4 max
2.54
44.8 max 38.1
Dimensions in mm. (1) Screw 6-32 UNC-2A available on request. (2) Leads gold plated.
Fig.2 SOT115J.
1997 Apr 10
4
Philips Semiconductors
Product specification
CATV amplifier module
DEFINITIONS Data Sheet Status Objective specification Preliminary specification Product specification Limiting values
BGY61
This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1997 Apr 10
5
Philips Semiconductors
Product specification
CATV amplifier module
NOTES
BGY61
1997 Apr 10
6
Philips Semiconductors
Product specification
CATV amplifier module
NOTES
BGY61
1997 Apr 10
7
Philips Semiconductors – a worldwide company
Argentina: see South America Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. +61 2 9805 4455, Fax. +61 2 9805 4466 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center.