BR1002

www.eicsemi.com BR1000 - BR1010 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 10 Amperes FEATURES : * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Rated isolation-voltage 2000 VAC * Ideal for printed circuit board * Pb / RoHS Free MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 6.1 grams BR10 0.166 (4.20) 0.142 (3.60) 0.520 (13.20) 0.480 (12.20) AC 0.091 (2.3) 0.169 (4.3) AC 0.77 (19.58) 0.73 (18.54) 0.052 (1.30) 0.048 (1.20) 0.30 (7.60) 0.25 (6.35) 0.75 (19.1) Min. Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current Tc=55°C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Current Squared Time at t < 8.3 ms. Maximum Forward Voltage per Diode at IF = 5 A Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance (Note ...