HIGH CURRENT SINGLE-PHASE SILICON BRIDGE RECTIFIER
· Electrically Isolated Metal Case for
Maximum Heat Dissipation
· Surge Overload Ratings to 400 Amperes
· Rating to 1,000V PRV.
· High efficiency
· UL Recognized File # E-216967
Case: Metal or molded plastic with heatsink integrally
mounted in the bridge encapsulation
Suffix letter "P" added to indicate plastic
Terminals: Either plated 0.25" (6.35mm) Fasten lugs or
plated copper leads 0.040" (1.02mm) diameter.
Suffix letter "W" added to indicate leads
Mounting position: Any
Weight: 1.0ounce, 30.0gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current at TC=55℃
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 17.5A DC and 25℃
Maximum Reverse Current
at Rated DC Blocking Voltage
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Symbols KBPC35005 KBPC3501 KBPC3502 KBPC3504 KBPC3506 KBPC3508 KBPC3510
VRRM 50 100 200 400 600 800 1000
70 140 280 420 560 700
VDC 50 100 200 400 600 800 1000
I(AV) 35.0 Amp
IFSM 400 Amp
-55 to +150
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal resistance from junction to case per leg