DatasheetsPDF.com

BT136F-500 Dataheets PDF



Part Number BT136F-500
Manufacturers NXP
Logo NXP
Description Triacs
Datasheet BT136F-500 DatasheetBT136F-500 Datasheet (PDF)

Philips Semiconductors Product specification Triacs BT136F series GENERAL DESCRIPTION Glass passivated triacs in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. QUICK REFERENCE DATA SYMBOL PARAMETER BT136FBT136FBT136FRepetitive peak off-state voltages RMS on-stat.

  BT136F-500   BT136F-500



Document
Philips Semiconductors Product specification Triacs BT136F series GENERAL DESCRIPTION Glass passivated triacs in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. QUICK REFERENCE DATA SYMBOL PARAMETER BT136FBT136FBT136FRepetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. MAX. MAX. UNIT 500 500F 500G 500 4 25 600 600F 600G 600 4 25 800 800F 800G 800 4 25 VDRM IT(RMS) ITSM V A A PINNING - SOT186 PIN 1 2 3 DESCRIPTION main terminal 1 PIN CONFIGURATION case SYMBOL T2 main terminal 2 gate 1 2 3 T1 case isolated G LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current I2t for fusing Repetitive rate of rise of on-state current after triggering full sine wave; Ths ≤ 92 ˚C full sine wave; Tj = 125 ˚C prior to surge; with reapplied VDRM(max) t = 20 ms t = 16.7 ms t = 10 ms ITM = 6 A; IG = 0.2 A; dIG/dt = 0.2 A/µs T2+ G+ T2+ GT2- GT2- G+ CONDITIONS MIN. -40 -500 5001 MAX. -600 6001 4 25 27 3.1 50 50 50 10 2 5 5 0.5 150 125 -800 800 UNIT V A A A A2s A/µs A/µs A/µs A/µs A V W W ˚C ˚C I2t dIT/dt IGM VGM PGM PG(AV) Tstg Tj Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature over any 20 ms period 1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 3 A/µs. February 1996 1 Rev 1.100 Philips Semiconductors Product specification Triacs BT136F series ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL Visol PARAMETER Repetitive peak voltage from all three terminals to external heatsink CONDITIONS R.H. ≤ 65% ; clean and dustfree MIN. TYP. MAX. 1500 UNIT V Cisol Capacitance from T2 to external f = 1 MHz heatsink - 12 - pF THERMAL RESISTANCES SYMBOL Rth j-hs Rth j-a PARAMETER Thermal resistance junction to heatsink Thermal resistance junction to ambient CONDITIONS full or half cycle with heatsink compound without heatsink compound in free air MIN. TYP. 55 MAX. 5.5 7.2 UNIT K/W K/W K/W STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL IGT PARAMETER Gate trigger current CONDITIONS BT136FVD = 12 V; IT = 0.1 A T2+ G+ T2+ GT2- GT2- G+ VD = 12 V; IGT = 0.1 A T2+ G+ T2+ GT2- GT2- G+ VD = 12 V; IGT = 0.1 A IT = 5 A VD = 12 V; IT = 0.1 A VD = 400 V; IT = 0.1 A; Tj = 125 ˚C VD = VDRM(max); Tj = 125 ˚C MIN. TYP. ... 0.25 5 8 11 30 7 16 5 7 5 1.4 0.7 0.4 0.1 35 35 35 70 20 30 20 30 15 MAX. ...F 25 25 25 70 20 30 20 30 15 1.70 1.5 0.5 ...G 50 50 50 100 30 45 30 45 30 mA mA mA mA .


BT136F BT136F-500 BT136F-500F


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)