www.vishay.com
GLL4735 to GLL4763A
Vishay Semiconductors
Zener Diodes
DESIGN SUPPORT TOOLS AVAILABLE
3D 3D
3D Models
FEATURES
• Plastic package has underwriters laboratory flammability classification UL 94 V-0
• For surface mounted applications
• Glass passivated chip junction
• Low Zener impedance
• Low regulation factor
• High temperature soldering guaranteed: 250 °C/10 s at terminals
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
VZ range nom. Test current IZT VZ specification Circuit configuration
6.2 to 91 2.8 to 41 Pulse current
Single
UNIT V mA
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
GLL4735 to GLL4763A
GLL4735-E3/97 to GLL4763A-E3/97
GLL4735 to GLL4763A
GLL4735-E3/96 to GLL4763A-E3/96
TAPED UNITS PER REEL 5000 (12 mm tape on 13" reel) 1500 (12 mm tape on 7" reel)
MINIMUM ORDER QUANTITY 5000/box 1500/box
PACKAGE
PACKAGE NAME MELF (DO-213AB)
WEIGHT 116 mg
MOLDING COMPOUND FLAMMABILITY RATING
MOISTURE SENSITIVITY LEVEL
UL 94 V-0
MSL level 1 (according J-STD-020)
SOLDERING CONDITIONS Peak temperature max. 260 °C
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Power dissipation
Maximum steady state power dissipation is 1 W at TT = 75 °C
Ptot
Zener current
see table “Characteristics”
Junction to ambient air Junction temperature Storage temperature range
RthJA Tj Tstg
VALUE 1000
170 150 -65 to +150
UNIT mW
°C/W °C °C
Rev. 1.8, 06-Mar-2019
1 Document Number: 85781
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
GLL4735 to GLL4763A
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE RANGE (1)
VZ at IZT1 V
TEST CURRENT
IZT1
IZT2
mA
DC REVERSE LEAKAGE CURRENT
IR at VR
μA V
DYNAMIC RESISTANCE f = 1 kHz
ZZ at IZT1
ZZK at IZT2
NOM.
MAX.
MAX.
MAX.
ZENER CURRENT (2)
IZM mApk MAX.
FORWARD VOLTAGE at 200 mA
VF V
MAX.
GLL4735
6.2
41 1 50 3
2
700 730 1.2
GLL4736
6.8
37 1 10 4
3.5
700
660
1.2
GLL4737
7.5
34 0.5 10 5
4
700 605 1.2
GLL4738
8.2
31 0.5 10 6
4.5
700
550
1.2
GLL4739
9.1
28 0.5 10 7
5
700 500 1.2
GLL4740
10
25 0.25 10 7.6
7
700 454 1.2
GLL4741
11
23 0.25 5 8.4
8
700 414 1.2
GLL4742
12
21 0.25 5 9.1
9
700 380 1.2
GLL4743
13
19 0.25 5 9.9
10
700
344
1.2
GLL4744
15
17 0.25 5 11.4
14
700
305
1.2
GLL4745
16
15.5 0.25
5 12.2
16
700
285
1.2
GLL4746
18
14 0.25 5 13.7
20
750
250
1.2
GLL4747
20
12.5 0.25
5 15.2
22
750
225
1.2
GLL4748
22
11.5 0.25
5 16.7
23
750
205
1.2
GLL4749
24
10.5 0.25
5 18.2
25
750
190
1.2
GLL4750
27
9.5 0.25 5 20.6
35
750
170
1.2
GLL4751
30
8.5 0.25 5 22.8
40
1000
150
1.2
GLL4752
33
7.5 0.25 5 25.1
45
1000
135
1.2
GLL4753
36
7 0.25 5 27.4
50
1000
125
1.2
GLL4754
39
6.5 0.25 5 29.7
60
1000
115
1.2
GLL4755
43
6 0.25 5 32.7
70
1500
110
1.2
GLL4756
47
5.5 0.25 5 35.8
80
1500
95
1.2
GLL4757
51
5 0.25 5 38.8
95
1500
90
1.2
GLL4758
56
4.5 0.25 5 42.6
110
2000
80
1.2
GLL4759
62
4 0.25 5 47.1
125
2000
70
1.2
GLL4760
68
3.7 0.25 5 51.7
150
2000
65
1.2
GLL4761
75
3.3 0.25 5 56
175
2000
60
1.2
GLL4762
82
3 0.25 5 62.2
200
3000
55
1.2
GLL4763
91
2.8 0.25 5 69.2
250
3000
50
1.2
Notes
(1) Standard voltage tolerance is ± 10 %, suffix A = ± 5 % (2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC® method
Rev. 1.8, 06-Mar-2019
2 Document Number: 85781
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
GLL4735 to GLL4763A
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PM(AV) -- Average Power Dissipation (W)
1.0
60Hz Resistive or Inductive Load 0.75
0.5
0.25
0 25
18210
P.C.B. Mounted on 0.31 x 0.31 x 0.08 " (8 x 8 x 2 mm) Copper areas pads
50 75 100 125 150
Terminals Temperature ( °C)
175
Fig. 1 - Maximum Continuous Power Dissipation
ZZ -- Dynamic Zener Impedance (Ω)
1000
TJ = 25°C
100 VZ = 91V VZ = 56V
10 VZ = 30V
1 0.5
18213
1
VZ = 6.2V
10 100 IZT -- Zener Test Current (mA)
Fig. 4 - Typical Zener Impedance
500
10 10
Instantaneous Reverse Current (μA)
Instantaneous Forward Current (A)
VZ -- Temperature Coefficient (mV/°C)
1
Pulse Width = 300 s 1% Duty Cycle 0.1 .