SINGLE-PHASE BRIDGE RECTIFIER
KBU8A THRU KBU8M
50 to 1000 Volts
This series is UL recognized under component
index, file number E127707
High forward surge current capability
Ideal for printed circult board
High temperature soldering guaranteed:
260/10 second, 0.375" (9.5mm) lead length
at 5 lbs. (2.3kg) tension.
Case: Transfer molded plastic
Terminal: Lead solderable per MIL - STD - 202E
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #6 screw, 5 in,- lbs. Torqute Max.
Weight: 0.27 ounce, 7.59 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
SYMBOLS KBU8A KBU8B KBU8D KBU8G KBU8J KBU5K KBU8M UNIT
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
TC = 100
Rectified Output Current, at TA= 45 (Note3)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage Drop
per bridge element at 8.0A
Maximum DC Reverse Current at ratedTA = 25
DC blocking voltage per element
Typical Junction Capacitance(Note 1)
Typical Thermal Resistance (Note 2)
Operating Temperature Range
Storage Temperature Range
(-65 to +150)
(-65 to +150)
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2. Unit mounted on 3.0" X 3.0" X 0.11" thick (7.5 X 7.5 X 0.3cm) Al. plate.
3. Unit mounted in free air, no heatsink, P.C.B. at 375" (9.5mm) lead length with. 5" X 5" (12 X 12mm) copper pads.
MIC INVESTMENTS (CHINA) COMPANY LIMITED