DC COMPONENTS CO., LTD.
R RECTIFIER SPECIALISTS
KBPC15005
THRU
KBPC1510
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 15 Amperes
FEATURES
* Metal case for Maximum Heat Dissipation
* Surge overload ratings - 240 Amperes
* Low forward voltage drop
MECHANICAL DATA
* Case: Molded plastic with heatsink
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Plated .25"(6.35mm) Faston lugs, Solderable per
MIL-STD-202E, Method 208 guaranteed
* Polarity: As marked
* Mounting position: Any
* Weight: 30 grams approx.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.500
(12.7)
TYP.
1.181(30.0)
1.102(28.0)
.673(17.1)
.633(16.1)
MB-25
.442(11.2)
.424(10.7)
.479(12.1)
.458(11.6)
HOLE FOR
NO. 8 SCREW
.732(18.6)
.692(17.6)
AC
AC
.673(17.1) 1.181(30.0)
.633(16.1) 1.102(28.0)
.582(14.8)
.543(13.8)
.033 x .250
(0.8 x 6.4)
Dimensions in inches and (millimeters)
SYMBOL KBPC15005 KBPC1501 KBPC1502 KBPC1504 KBPC1506 KBPC1508 KBPC1510 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output Current at Tc = 50oC
VDC
IO
50
100 200 400 600 800 1000 Volts
15 Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
300 Amps
Maximum Forward Voltage Drop per element at 5.0A DC
Maximum DC Reverse Current at Rated
@TA = 25oC
DC Blocking Voltage per element
@TA = 100oC
I2t Rating for Fusing (t<8.3ms)
VF
IR
I2t
1.1 Volts
10
µAmps
500
374 A2Sec
Typical Junction Capacitance (Note1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
CJ
RθJ A
TJ,TSTG
40
19
-55 to +175
pF
0C/W
0C
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to Ambient and from Junction to Lead mounted on P.C.B. with 0.47 x 0.47" (12 x 12mm) copper pads.
REV-1,Apr/25/2013
