DC COMPONENTS CO., LTD.
R RECTIFIER SPECIALISTS
GBPC6005
THRU
GBPC610
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volt
CURRENT - 6.0 Amperes
FEATURES
* Surge overload rating: 150 Amperes peak
* Low forward voltage drop
* Small size: simple installation
* Glass passivated junction
BR-6
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Symbols molded or marked on body
* Mounting position: Any
* Weight: 6.1 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.276(7.0)
.236(6.0)
.043(1.1)
.035(0.9)
.750 MIN.
(19.1)
.620(15.7)
.580(14.7)
.445(11.3)
.405(10.3)
HOLE FOR
No.6 SCREW
AC .445(11.3) .620(15.7)
.405(10.3) .580(14.7)
AC
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output Current at Tc = 50 oC
SYMBOL
VRRM
VRMS
VDC
IO
GBPC
6005
50
35
50
GBPC
601
100
70
100
GBPC
602
200
140
200
GBPC GBPC
604 606
400 600
280 420
400 600
6.0
GBPC
608
800
560
800
GBPC
610
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
150 Amps
Maximum Forward Voltage Drop per element at 3.0A DC
Maximum DC Reverse Current at Rated
DC Blocking Voltage per element
@TA = 25oC
@TC = 100oC
Operating Temperature Range
Storage Temperature Range
VF
IR
TJ
T STG
1.1
10
1000
-55 to + 125
-55 to + 150
Volts
uAmps
0C
0C
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads.
REV-1,MARCH,2015
1
www.dccomponents.com
