DATA SHEET www.onsemi.com
Single Channel, AC/DC Sensing Input, Phototransistor Optocoupler In Half-Pitch Mini-Flat 4-Pi...
DATA SHEET www.onsemi.com
Single Channel, AC/DC Sensing Input, Photo
transistor Optocoupler In Half-Pitch Mini-Flat 4-Pin Package
FODM214, FODM217 Series
The FODM217 series consist of a gallium arsenide infrared emitting diode driving a photo
transistor. The FODM214 series consist of two gallium arsenide infrared emitting diodes connected in inverse parallel for AC operation. Both were built in a compact, half−pitch, mini−flat, 4−pin package. The lead pitch is 1.27 mm.
Features
Current Transfer Ratio Ranges from 20 to 600%
at IF = ±1 mA, VCE = 5 V, TA = 25°C ♦ FODM214 − 20 to 400% ♦ FODM214A − 50 to 250% at IF = 5 mA, VCE = 5 V, TA = 25°C ♦ FODM217A − 80 to 160% ♦ FODM217B − 130 to 260% ♦ FODM217C − 200 to 400% ♦ FODM217D − 300 to 600%
Safety and
Regulatory Approvals:
♦ UL1577, 3750 VACRMS for 1 min ♦ DIN EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage
Applicable to Infrared Ray Reflow, 260°C
Typical Applications
Primarily Suited for DC−DC Converters For Ground Loop Isolation, Signal to Noise Isolation Communications – Adapters, Chargers Consumer – Appliances, Set Top Boxes Industrial – Power Supplies, Motor Control, Programmable Logic
Control
MFP4 2.5x4.4, 1.27P CASE 100AL
MARKING DIAGRAM
1. ON = Corporate Logo 2. 21xx = Device Number 3. V = DIN EN/IEC60747−5−5 Option 4. X = One−Digit Year Code 5. YY = Digit Work Week 6. R1 = Assembly Package Code
PIN CONNECTIONS
ORDERING INFORMATION
See detailed ordering and shipping information on page 7 of this data...