KBP202

www.eicsemi.com TH97/2478 TH09/2479 IATF 0113686 SGS TH07/1033 KBP200 - KBP210 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 2.0 Amperes FEATURES : * High case dielectric strength * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Rated isolation-voltage 2000 VAC * Ideal for printed circuit board * Pb / RoHS Free MECHANICAL DATA : * Case : Molded plastic * Epoxy : UL94V-0 rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.4 grams 0.448 (11.4) 0.433 (11.0) 0.696 (17.7) MIN. 0.051 (1.30) 0.043 (1.10) KBP 0.59 (14.9) 0.57 (14.5) + AC AC Φ3 0.0307 (0.78) 0.0303 (0.77) 0.150 (3.82) 0.148 (3.78) 0.151 (3.85 ) 0.147 (3.75) Dimensions in inches and ( millimeter ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current Tc = 50°C Peak Forward Surge Current, Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing ( t < 8.3 ms. ) Maximum Forward Voltage per Diode at IF = 1.0 A Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Junction ...