GBU4005 THRU GBU410
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
REVERSE VOLTAGE:
FORWARD CURRENT:
50 to 1000 VOLTS
4.0 AMPERE
FEATURES
· Glass passivated chip junction
· Ideal for printed circuit board
· Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
· Reliable low cost construction utilizing molded
plastic technique
GBU
MECHANICAL DATA
Case: Molded plastic, GBU
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
Mounting position: Any
Weight: 0.15ounce, 4.0gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current at
TC=100℃(Note 1)
TA= 40℃(Note 2)
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 4.0A DC and 25℃
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25℃
TA=125℃
Typical Junction Capacitance (Note 3)
Typical Thermal Resistance (Note 2)
Typical Thermal Resistance (Note 1)
Operating and Storage Temperature Range
Symbols GBU4005 GBU401 GBU402 GBU404 GBU406 GBU408 GBU410
VRRM 50 100 200 400 600 800 1000
VRMS
35
70 140 280 420 560 700
VDC 50 100 200 400 600 800 1000
4.0
I(AV)
3.0
Units
Volts
Volts
Volts
Amp
IFSM 150 Amp
VF
IR
CJ
RθJA
RθJC
TJ，Tstg
1.0
5.0
500
100
22
4.2
-55 to +150
45
Volts
uAmp
pF
℃/W
℃/W
℃
NOTES:
1- Unit case mounted on 1.6 x 1.6 x 0.06” thick (4.0 x4.0 x 0.15cm) Al. Plate
2- Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads and 0.375" (9.5mm) lead length
3- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
4- Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
