SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
P6SMB6.8 THRU P6SMB200
VOLTAGE RANGE
POWER
6.8 to 200 Volts
600 Watts
FEATURES
• Glass passivated chip junction
• 600W surge capacity @ 10/1000 µSec
wave form
• Fast response, typically less then 1 pSec
• Low Zener impedence
• Excellent clamping capability
• Available in either “J” lead (P6SMB) of
• “G” lead (SMBG)
• High temperature soldering guaranteed:
250OC/ seconds at terminals
MECHANICAL DATA
• Case: transfer molded plastic
• Epoxy: UL94V – 0 rate flame retardant
• Polarity: Color band denotes cathode end,
except on bipolar parts which have no band
• Terminals: solderable per MIL-STD-202E
method 208C
• Weight: 0.003 ounce, 0.093 gram
DO-215AA
(SMB-G)
DO-214AA
(SMB)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25OC ambient temperature unless otherwise specified
Peak Power Dissipation 10/1000µS waveform (Note 1,2)
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method) (Note 2)
Operating Junction Temperature Range
Storage Temperature Range
SYMBOLS
PPPM
IFSM
TJ
TSTG
600
100
(-55 to +150)
(-55 to +150)
Notes:
1.
2.
3.
4.
5.
Non-repetitive current pulse, per Fig. 3 and derated to TA = 25 OC per Fig. 2.
Mounted on copper pad area 0.2” x 0.2” x 0.0.0011” (5mm x 5mm x .03mm) at each terminal
8.3ns single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute, maximum.
For bipolar devices add a C to the part number, i.e. P6SMB5.0C or P6SMB5.0CA
Electrical characteristics apply in both directions for bipolar devices
UNIT
Watts
Amps
OC
OC
Sep-03, Rev A
Micro Electronic Instrument Inc.
