SS12 THRU S100
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
REVERSE VOLTAGE:
20 to 100 VOLTS
FORWARD CURRENT:
1.0 AMPERE
FEATURES
· Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
· For surface mounted applications
· High current capacity
· Built-in strain relief
· Low profile package
· Metal to silicon rectifier. majority carrier conduction
· High surge capacity
· Low power loss, high efficiency
· For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
· High temperature soldering : 260°C /10 seconds at terminals
DO-214AC(SMA)
MECHANICAL DATA
Case: Molded plastic, DO-214AC(SMA)
Terminals: Solder plated, solderable per MIL-STD-750,
method 2026 guaranteed
Polarity: Color band denotes cathode end
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.002 ounce, 0.064 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL (See Fig. 1)
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage at 1.0A (Note 1)
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25
T A=100
Typical Thermal Resistance (Note 2)
Operating Junction Temperature Range
Storage Temperature Range
Symbols
VRRM
VRMS
VDC
SS12
20
14
20
I(AV)
SS13
30
21
30
SS14
40
28
40
SS15
50
35
50
SS16
60
42
60
1.0
SS18
80
56
80
SS19
90
63
90
S100
100
70
100
Units
Volts
Volts
Volts
Amp
IFSM
VF
IR
RθJA
RθJL
TJ
Tstg
0.50
30
0.70
0.5
20
88
28
-55 to +125
-55 to +150
Amp
0.85 Volts
mAmp
/W
NOTES:
1- Pulse test: 300µs pulse width, 1% duty cycle
2- P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) Copper Pad Areas
