MBR3035PT THRU MBR30200PT
SCHOTTKY BARRIER RECTIFIER
REVERSE VOLTAGE:
35 to 200 VOLTS
FORWARD CURRENT:
30.0 AMPERE
FEATURES
· Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
· Metal silicon junction, majority carrier conduction
· Guard ring for overvoltage protection
· Low power loss, high efficiency
· For use in low voltage,high frequency inverters,free
whelling,and polarity protection applications
· High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
TO-3P/TO-247AD
MECHANICAL DATA
Case: Molded plastic, TO-3P/TO-247AD
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202
method 208 guaranteed
Polarity: As marked
Mounting position: Any
Weight: 0.2ounce, 5.6gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
(See Fig. 1)
Peak repetitive forward current at TC = 105°C
(rated VR, sq. wave, 20 KHz)
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Peak repetitive reverse current at tp = 2.0µs, 1KHz
at IF = 15A, TC = 25°C
Maximum Forward
at IF = 15A, TC = 125°C
Voltage (Note 1)
at IF = 30A, TC = 25°C
at IF = 30A, TC = 125°C
Maximum Reverse Current
at Rated DC Blocking Voltage
at TC=25℃
TC=125℃
Typical Thermal Resistance
Operating Temperature Range
Storage Temperature Range
Symbols MBR3035PT MBR3045PT MBR3050PT MBR3060PT MBR3080PT MBR30100PTMBR30150PTMBR30200PT
VRRM 35 45 50 60 80 100 150 200
VRMS 24 31 35 42 56 70 105 140
VDC 35 45 50 60 80 100 150 200
Units
Volts
Volts
Volts
I(AV) 30.0 Amp
IFRM
30.0 Amp
IFSM
IRRM
VF
IR
RθJC
TJ
Tstg
-
-
0.84
0.75
200
1.0
0.75 0.85
0.67 0.70
0.95 -
0.84 -
1.0
60
1.4
-55 to +150
-55 to +150
Amp
2.0 Amp
0.95
0.85
Volts
-
-
2.0
mAmp
100
℃/W
℃
℃
NOTES:
1- Pulse test: 300µs pulse width, 1% duty cycle
