Schottky Barrier Rectifier
Forward current: 2.0A
Reverse voltage: 150V
-Metal-Semiconductor junction with gard ring.
-Low forward voltage drop.
-High current capability.
-The plastic material carries UL recognition 94V-0
-For use in low voltage,high frequency inverters,
free wheeling, and polarity protection applications.
-Case: JEDEC DO-15 molded plastic.
-Polarity: color band denoted cathode end.
-Lead: plastic axial lead, solderable per MIL-STD-
202E, method 208C.
-Mounting position: any.
-Weight: 0.4 gram.
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Ratings at Ta=25°C unless otherwise noted.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derate current by 20% .
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current @TL=75°C
Peak forward surge current, 8.3ms single half sine-wave
super Imposed on rated load (JEDEC method)
Maximum instantaneous forward voltage at 2.0A (Note 1)
Maximum DC reverse current
at rated DC blocking voltage
Typical junction capacitance (Note 3)
Typical thermal resistance (Note 2)
Operating temperature range
-55 ~ +150
Storage temperature range
-55 ~ +150
1. Pulse test: 300µs pulse width, 1% duty cycle.
2. Thermal resistance from junction to ambient P.C.B. mounted with 0.375" (9.5mm) lead length with 1.5"×1.5"(38×38mm) copper pads.
3. Measured at 1.0 MHZ and reverse voltage of 4.0V