TRANSIENT VOLTAGE SUPPRESSOR
PA RT N O. 3 . 0 S M D J 5 . 0 A ( C A ) - 3 . 0 S M D J 1 7 0 A ( C A )
Surface Mount Unidirectional and Bidirectional Transient Voltage Suppressors
Voltage Range 5.0V - 170V
3000W Peak Pulse Power Dissipation
For surface mounted applications
Reliable low cost construction utilizing molded plastic technique
Response Time is Typically < 1 ns
Uni-direction, less than 5.0ns for Bi-direction, form 0 Volts to BV min
ESD Rating of above 16 kV per Human Body Model
ESD Rating of above 30 kV (Contact Discharge) per IEC61000−4−2
EFT (Electrical Fast Transients) Rating of 40 A per IEC61000−4−4
Plastic material has UL flammability classification 94V-0
Typical IR less than 1uA above 10V
Meets MSL 1 Requirements
Solid-state silicon avalanche technology
Qty per Reel
“xx” =Working Peak Reverse Voltage
Maximum Ratings and Electrical Characteristics
Peak Power Dissipation At Tj = 25℃, Tp = 1ms (Note 1,2 )
Peak Forward Surge Current 8.3ms single half sine-wave super
Lead Soldering Temperature
Operating Temperature Range
Storage Temperature Range
260 (10 sec.)
-55 to +155
-55 to +175
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
1. Non-repetitive current pulse, per fig. 4 and derated above TA= 25 C per fig.1.
2. Thermal Resistance junction to Lead
3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only).
4.Ratings at 25℃ ambient temperature unless otherwise specified.
5.Single phase, half wave, 60Hz, resistive or inductive load.
6. For Capacitive Load, Derate Current By 20%