Transient Voltage Suppressors
DO-214AB/SMC Package
SMDJ Series
FEATURE
Breakdown Voltage from 5.0 to 440V
3000W peak pulse power capability with a 10/1000μs waveform,
repetitive rate (duty cycle): 0.01%
Glass passivated chip
Excellent clamping capability, fast response time.
Low incremental surge resistance, Low profile package
Terminal: Solderable per MIL-STD-750, Method 2026
Epoxy: UL 94V-0 rate flame retardant
UL/cUL safety approved: certification No: E223045
ELECTRICAL CHARACTERISTICS
Parameter
Symbols
Value
Peak power dissipation with a 10/1000µs waveform(1)
PPP 3000
Peak pulse current with a 10/1000μs waveform(1)
IPP See Next Table
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-wave unidirectional only.
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty
cycle = 4 pulses per minute maximum.
Maximum instantaneous forward voltage at 25 A for unidirectional only.
VF <3.5V for devices of VBR <200V and VF <5.0V for devices of VBR >201V
PD
IFSM
VF
6.0
300
3.5/5.0
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Rating at 25ºC, ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1.Non-repetitive current pulse per Fig.5 and derated above TA=25℃ per Fig.1
DIMENSIONS
Item
W
A
B
C
D
E
F
G
DO-214AB(SMC)
Milimeters
Min.
Max.
6.52 7.11
2.75 3.25
5.52 6.22
2.00 2.62
0.76 1.52
7.64 8.13
- 0.203
0.152
0.305
Unit
Watts
Amps
Watts
Amps
Volts
°C
SOLDERING PAD LAYOUT
ABCD
3.3 6.9 9.3 4.4
E
2.5
Rev. 7c
