FAST SWITCHING PLASTIC RECTIFIER
1N4942 THRU 1N4948
FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
Fe...
Description
1N4942 THRU 1N4948
FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
Features
High temperature metallurgically bonded construction Hermetically sealed package 1.0 ampere operation at TA=55 with no thermal runaway Typical IR less than 0.1 A Capable of meeting environmental standards of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension
Mechanical Data
Case: DO-41 solid plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode Weight: 0.012 ounce, 0.33 gram
DIM ENSIONS DIM A B C D inches Min. 0.165 0.079 0.028 1.000 Max. 0.205 0.106 0.034 Min. 4.2 2.0 0.71 25.40 mm Max. 5.2 2.7 0.86 Note
Maximum Ratings and Electrical Characteristics
Ratings at 25 ambient temperature unless otherwise specified.
Symbols
1N4942
1N4944
1N4946
1N4947
1N4948
Units
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55 Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at: 1.0A at: 2.0A, TA=40 Maximum DC reverse current at rated DC blocking voltage TA=25 TA=175
VRRM VRMS VDC I(AV) IFSM VF IR Trr CJ R
JA
200 140 200
400 280 400
600 420 600 1.0 25.0 1.3 2.5 1.0 500.0
800 56...
Similar Datasheet