BXY42 HiRel Silicon PIN Diode
T T1
• • • • •
HiRel Discrete and Microwave Semiconductor PIN Diode for high speed switching of RF signals Very low capacitance Hermetically sealed microwave package Space Qualified ESA/SCC Detail Spec. No.: 5513/017 Type Variant No.s 01 to 02
ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BXY42-T (ql) BXY42-T1 (ql) Marking Ordering Code see below Pin Configuration Package T T1
1 1
2 2
(ql) Quality Level:
P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality,
Ordering Code: Ordering Code: Ordering Code: Ordering Code:
Q62702X143 on request on request Q62702X168
(see order instructions for ordering example)
Semiconductor Group
1 of 5
Draft B, September 99
BXY42
Maximum Ratings Parameter Reverse Voltage Peak Forward Current 1) Power Dissipation BXY42-T
2) 3)
Symbol VR IFM Ptot
Values 50 5 600 350
Unit V A mW
BXY42-T1
Operating Temperature Range Storage Temperature Range Soldering Temperature Junction Temperature Thermal Resistance Junction-Case BXY42-T BXY42-T1
4)
Top Tstg Tsol Tj Rth(j-c)
-55 to +175 -65 to +175 +250 175 200 350
°C °C °C °C K/W
Notes.: 1.) At tp = 1,0µs, Duty Cycle=0,001% 2.) At TCASE = 55 °C. For TCASE > 55 °C derating is required. 3.) At TCASE = 52,5 °C. For TCASE > 52,5 °C derating is required. 4.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have elapsed. Electrical Characteristics at TA=25°C; unless otherwise specified Parameter DC Characteristics Reverse Current 1 VR1=50V Reverse Current 2 VR2=40V Forward Voltage IF=100mA VF 0,97 1,1 V IR2 5 nA IR1 10 µA Symbol min. Values typ. max. Unit
Semiconductor Group
2 of 5
Draft B, September 99
BXY42
Electrical Characteristics (continued) Parameter AC Characteristics Total Capacitance VR=20V; f=1MHz Forward Resistance 1 f=100MHz, IF1=1mA Forward Resistance 2 f=100MHz, IF2=10mA Minority Carrier Lifetime IF=10mA, IR=6mA, IR=3mA τL 35 50 ns RF2 1 2,5 Ω RF1 2 3,5 Ω CT 0,22 0,24 pF Symbol min. Values typ. max. Unit
Semiconductor Group
3 of 5
Draft B, September 99
BXY42
Order Instructions: Full type variant including package variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... BXY42- (x) (ql) (x): Package Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702X168 BXY42-T1 ES For BXY42 in T1 Package; ESA Space Quality Level
Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: e-mail: Address: ++89 234 24480 ++89 234 28434
[email protected] Infineon Technologies Semiconductors, High Frequency Products Market.