TVS Diode
SMCJ Series
TVS Diodes
Surface Mount – 1500W > SMCJ series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approv...
Description
SMCJ Series
TVS Diodes
Surface Mount – 1500W > SMCJ series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2)
by 10/1000us Test Waveform(Fig.4) (Note 1),(Note PPPM
1500
W
2)-Single Die Parts
Peak Pulse Power Dissipation(Fig.2)
by 10/1000us Test Waveform(Fig.4) (Note 1), (Note PPPM 2000 W 2)-Stacked Die Parts (Note 5)
Power Dissipation on Infinite Heat Sink at TL=50OC PD
6.5
W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
200
A
Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 4)
VF
3.5/5.0 V
Operating Temperature Range Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient
TJ -65 to 150 °C
TSTG -65 to 175 °C
RθJL
15 °C/W
RθJA
75 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. 4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 5. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Description
The SMCJ series is desi...
Similar Datasheet