www.vishay.com
1.5SMC Series
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
Cathode
SMC (DO-214AB)
Anode
(unidirectional)
(bidirectional)
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
FEATURES
• Low profile package
Available
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
Available
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
• AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM (unidirectional) VWM (bidirectional) VBR (unidirectional) VBR (bidirectional)
PPPM PD
IFSM (uni-directional only) TJ max. Polarity
5.8 V to 459 V 5.8 V to 185 V 6.8 V to 540 V 6.8 V to 220 V
1500 W 6.5 W 200 A 150 °C Unidirectional, bidirectional
Package
SMC (DO-214AB)
DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. 1.5SMC220CA). Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)
Operating junction and storage temperature range
Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
SYMBOL PPPM IPPM PD IFSM
TJ, TSTG
VALUE 1500
See next table 6.5 200
-65 to +150
UNIT W A W A °C
Revision: 09-Jan-2024
1
Document Number: 88303
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT .