www.vishay.com
P4SMA Series
Vishay General Semiconductor
Surface-Mount TRANSZORB® Transient Voltage Suppressors
SMA (DO-214AC)
Cathode
Anode
(unidirectional)
(bidirectional)
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
PRIMARY CHARACTERISTICS
VWM (unidirectional) VWM (bidirectional) VBR (unidirectional) VBR (bidirectional)
PPPM PD
IFSM (uni-directional only) TJ max. Polarity
5.8 V to 459 V 5.8 V to 185 V 6.8 V to 540 V 6.8 V to 220 V 400 W, 300 W
3.3 W 40 A 150 °C Unidirectional, bidirectional
Package
SMA (DO-214AC)
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. P4SMA10CA). Electrical characteristics apply in both directions.
FEATURES
• Low profile package
Available
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 91 V)
• Excellent clamping capability
Available
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
• AEC-Q101 qualified available - Automotive ordering code: P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.
MECHANICAL DATA
Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Operating junction and storage temperature range
SYMBOL PPPM IPPM PD IFSM
TJ, TSTG
VALUE 400
See next table 3.3 40
-65 to +150
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 300 W above 91 V (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
UNIT W A W A °C
Revision: 30-Jun-2021
1
Document Number: 88367
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT I.