Document
SGM7SZ32 Small Logic Two-Input OR Gate
GENERAL DESCRIPTION
The SGM7SZ32 is a single two-input OR gate from SGMICRO's Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V, independent of VCC operating voltage.
The SGM7SZ32 is available in Green SOT-23-5 and SC70-5 packages. It operates over an ambient temperature range of -40℃ to +85℃.
FEATURES
● Ultra-High Speed: tPD = 3.8ns (TYP) into 50pF at VCC = 3.3V
● High Output Drive: ±24mA at VCC = 3V ● Broad VCC Operating Range: 1.65V to 5.5V ● Matches Performance of LCX Operated at
VCC = 3.3V ● Power Down High-Impedance Inputs/Output ● Over-Voltage Tolerant Inputs Facilitate 5V to 3V
Translation ● Available in Green SOT-23-5 and SC70-5 Packages
LOGIC SYMBOL
A Y
B
FUNCTION TABLE
INPUTS
A
B
L
L
L
H
H
L
H
H
Y=A+B H = HIGH Logic Level L = LOW Logic Level
OUTPUT Y L H H H
SG Micro Corp www.sg-micro.com
OCTOBER 2013 – REV. A
SGM7SZ32
Small Logic Two-Input OR Gate
PACKAGE/ORDERING INFORMATION
MODEL SGM7SZ32
PACKAGE DESCRIPTION
SC70-5
SOT-23-5
SPECIFIED TEMPERATURE
RANGE
-40℃ to +85℃
ORDERING NUMBER
SGM7SZ32YC5G/TR
-40℃ to +85℃ SGM7SZ32YN5G/TR
PACKAGE MARKING
SFAXX
SFBXX
PACKING OPTION
Tape and Reel, 3000
Tape and Reel, 3000
NOTE: XX = Date Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly.
MARKING INFORMATION
SYY X X
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.) Date code - Year ("A" = 2010, "B" = 2011 …) Chip I.D. For example: SFACC (2012, March)
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC .......................................... -0.5V to 6.0V DC Input Voltage, VIN........................................ -0.5V to 6.0V DC Output Voltage, VOUT .................................. -0.5V to 6.0V DC Input Diode Current, IIK (VIN < -0.5V).................................................................-50mA DC Output Diode Current, IOK (VOUT < -0.5V) ..............................................................-50mA DC Output Current, IOUT .............................................. ±50mA DC VCC or Ground Current, ICC or IGND........................ ±50mA Junction Temperature.................................................+150℃ Storage Temperature Range ........................ -65℃ to +150℃ Lead Temperature (Soldering, 10sec) ........................+260℃ ESD Susceptibility HBM............................................................................. 8000V MM................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ....................... -40℃ to +85℃
OVERSTRESS CAUTION
Stresses beyond those listed may cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational section of the specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time.
SG Micro Corp www.sg-micro.com
OCTOBER 2013 2
SGM7SZ32 PIN CONFIGURATIONS
Small Logic Two-Input OR Gate
(TOP VIEW)
SYYxx
A1
5 VCC
B2
GND 3
4Y
SOT-23-5/SC70-5
PIN DESCRIPTION
PIN
NAME
FUNCTION
1
A
Input. Unused input must be held high or low. It may not float.
2
B
Input. Unused input must be held high or low. It may not float.
3
GND
Ground.
4
Y
Output.
5
VCC
Power Supply.
SG Micro Corp www.sg-micro.com
OCTOBER 2013 3
SGM7SZ32
Small Logic Two-Input OR Gate
ELECTRICAL CHARACTERISTICS
(TA = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
VCC (V)
GENERAL
Power Supply Range VCC
Supply Voltage Data Retention
Input Voltage
VIN
Output Voltage
VOUT
1.8, 2.5 ± 0.2
Input Rise and Fall Times
tr, tf
3.3 ± 0.3
5.0 ± 0.5
DC PERFORMANCE
HIGH Leve.