RF Pulse Transformer
TP-104
RF Pulse Transformer, 750 KHz - 400 MHz
Features
• 50 Ohms Unbalanced/200 Ohms Balanced • Low Insertion Loss: 0.4...
Description
TP-104
RF Pulse Transformer, 750 KHz - 400 MHz
Features
50 Ohms Unbalanced/200 Ohms Balanced Low Insertion Loss: 0.4 dB Typical DC Isolation: Input to Output MIL-STD-202 Screening Available
Description
The flux coupled Balun Transformer can provide a wide range of impedance ratios: 1:1, 4:1, 9:1 and 16:1 are most common. DC isolation from primary coil to secondary coil is also a feature of this device.
FP-1
Schematic/Pin Configuration
Rev. V3
.
Electrical Specifications: TA = -55°C to +85°C
Parameter Impedance Insertion Loss
VSWR
Input Power Rise Time Droop (10%)
Test Conditions
Input - 50 Ohms Unbalanced Output - 200 Ohms Balanced
Frequency —
Units
Min
Typ
Max
— ———
—
10 - 50 MHz
dB — — 0.55
—
5 MHz - 200 MHz
Ratio
—
— 1.3:1
750 MHz - 400 MHz Ratio
—
— 2.0:1
10 - 90% —
750 MHz - 4 MHz 4 MHz - 400 MHz
Watts Watts
— —
— 0.4 — 1.0
— nS — 0.55 —
— nS — 130 —
1
ADVANCED: Data Sheets contain in...
Similar Datasheet