Photocouplers Infrared LED & Photo Transistor
TLP183
TLP183
1. Applications
• Office Equipment • Programmable Logic Co...
Photocouplers Infrared LED & Photo
Transistor
TLP183
TLP183
1. Applications
Office Equipment Programmable Logic Controllers (PLCs) AC Adapters I/O Interface Boards
2. General
TLP183 is a low input type photo
transistor coupler that consists of a photo
transistor optically coupled to an infrared LED in a SO6 package. TLP183 is guaranteed high isolation voltage (3750 Vrms) and wide operating temperature (Ta = -55 to 125 �). TLP183 is smaller than DIP package, it's suitable for high density surface mounting applications such as programmable controllers.
3. Features
(1) Collector-emitter voltage: 80 V (min) (2) Current transfer ratio: 50 % (min) (@IF = 0.5 mA, VCE = 5 V)
GB Rank: 100 % (min) (@IF = 0.5 mA, VCE = 5 V) (3) Isolation voltage: 3750 Vrms (min) (4) Operating temperature: -55 to 125 � (5) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory
Note 1: When a VDE approved type is needed, please designate the Option (V4).
4. Packaging and Pin Assignment
11-4M1S
©2016-2020
1
Toshiba Electronic Devices & Storage Corporation
1: Anode 3: Cathode 4: Emitter 6: Collector
Start of commercial production
2013-09 2020-11-18
Rev.8.0
5. Mechanical Parameters
TLP183
Characteristics
Creepage distances Clearance Internal isolation thickness
Min
Unit
5.0
mm
5.0
0.4
6. Absolute Maximum Ratings (Note) ...