Octal 3-State Noninverting Bus Transceiver
TECHNICAL DATA
Octal 3-State Noninverting Bus Transceiver
IN74ALS245
This device contains eight pairs of 3-state logi...
Description
TECHNICAL DATA
Octal 3-State Noninverting Bus Transceiver
IN74ALS245
This device contains eight pairs of 3-state logic elements designed for asynchronous two-way communication between data buses.
These circuits are suited for use in memory, microprocessor systems and asynchronous bi-directional data buses. The Enable input (E) can be used to isolate the buses. Non-inverting logic output Switching response specified into 500Ω/50 pF Switching specifications guaranteed over full temperature and VCC
range Low level drive current:
54ALS = 12 mA, 74ALS = 24 mA
LOGIC DIAGRAM
ORDERING INFORMATION IN74ALS245N Plastic IN74ALS245DW SOIC TA = -10° to 70° C for all packages
PIN ASSIGNMENT
PIN 20=VCC PIN 10 = GND
FUNCTION TABLE
Control Inputs
Output Direction Enable
Operation
L L Data Transmitted from Bus B to Bus A
L H Data Transmitted from Bus A to Bus B
H X Buses Isolated (High Impedance State)
X = don’t care
1
IN74ALS245
MAXIMUM RATINGS*
Symbol VCC VIN VOUT...
Similar Datasheet