MIC/GND Cross-point Switch
WAS4732D
WAS4732D
MIC/GND Cross-point Switch for EU/US Headphone Compatible Application
http://www.sh-willsemi.com
D...
Description
WAS4732D
WAS4732D
MIC/GND Cross-point Switch for EU/US Headphone Compatible Application
http://www.sh-willsemi.com
Descriptions
The WAS4732D is a 2x2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector. The Ground switch has an ultra-low Ron of 0.1 Ω (typical) to minimize voltage drop across it, preventing undesired increase in headphone ground reference voltage. the switch state is controlled via the SEL input. When SEL=High, GND is connected to COM2 and MIC is connected to COM1; When SEL=Low, GND is connected to COM1 and MIC is connected to COM2. An internal pull-down 2MΩ resistor on SEL input sets the default state of the switch.
The WAS4732D is available in DFN2x2-6L package. Standard product is Pb-Free and halogen-Free.
Features
Supply voltage
: 2.3 ~ 5.0V
ultra-low Ron for GND Switch : 100mΩ
low Ron for MIC Switch
: 4.5 Ω
Break-Before-Make Switching
Low quiescent current over an Expanded Co...
Similar Datasheet