High and Low Side Driver
NCP5304
High Voltage, High and Low Side Driver
The NCP5304 is a High Voltage Power gate Driver providing two outputs for...
Description
NCP5304
High Voltage, High and Low Side Driver
The NCP5304 is a High Voltage Power gate Driver providing two outputs for direct drive of 2 N−channel power MOSFETs or IGBTs arranged in a half−bridge configuration.
It uses the bootstrap technique to insure a proper drive of the High−side power switch. The driver works with 2 independent inputs with cross conduction protection.
Features
High Voltage Range: up to 600 V dV/dt Immunity ±50 V/nsec Negative Current Injection Characterized Over the Temperature Range Gate Drive Supply Range from 10 V to 20 V High and Low Drive Outputs Output Source / Sink Current Capability 250 mA / 500 mA 3.3 V and 5 V Input Logic Compatible Up to VCC Swing on Input Pins Extended Allowable Negative Bridge Pin Voltage Swing to −10 V
for Signal Propagation
Matched Propagation Delays between Both Channels Outputs in Phase with the Inputs Cross Conduction Protection with 100 ns Internal Fixed Dead Time Un...
Similar Datasheet