C8051F508

Analog Peripherals - 12-Bit ADC Up to 200 ksps Up to 32 external single-ended inputs VREF from on-chip VREF, external pin or VDD Internal or external start of conversion source Built-in temperature sensor - Two Comparators Programmable hysteresis and response time Configurable as interrupt or reset source Low current On-Chip Debug - On-chip debug circuitry facilitates full speed, non- intrusive in-system debug (no emulator required) - Provides breakpoints, single stepping, inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Low cost, complete development kit Supply Voltage 1.8 to 5.25 V - Typical operating current: 19 mA at 50 MHz; - Typical stop mode current: 2 µA High-Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 50 MIPS throughput with 50 MHz clock - Expanded interrupt handler C8051F50x/F51x Mixed Signal IS...