Document
Datasheet Values Refer to PCN-OPT-1289-2023
www.vishay.com
TSOP582.., TSOP584..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
19026
LINKS TO ADDITIONAL RESOURCES
Product Page
Marking
Packages
Holders
Bends and Cuts
DESCRIPTION
This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These components have not been qualified to automotive specifications.
FEATURES • Individual IC settings to reach maximum
performance • Immunity against noise (lamps, LCD TV, Wi-Fi) • Low supply current • Photo detector and preamplifier in one package • Supply voltage: 2.0 V to 5.5 V • Material categorization:
for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS • Infrared remote control systems
DESIGN SUPPORT TOOLS • 3D models • Window size calculator
BLOCK DIAGRAM
16833_14
3
33 kΩ
1
Input
AGC
Band pass
Demodulator
2
PIN
Control circuit
Rev. 2.1, 10-Aug-2023
1
Document Number: 82461
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet Values Refer to PCN-OPT-1289-2023
www.vishay.com
TSOP582.., TSOP584..
Vishay Semiconductors
MECHANICAL DATA Pinning for TSOP582.., TSOP584..: 1 = OUT, 2 = GND, 3 = VS
1 2
3
23201
ORDERING CODE TSOP58... - 1500 pieces in bags
APPLICATION CIRCUIT
17170-14
Transmitter IR receiver
with TSALxxxx
VS
Circuit
OUT GND
R1
C1 VO
+ VS µC
GND
R1 and C1 recommended in case there are strong ripple or spikes on the supply line.
PARTS TABLE
AGC
30 kHz
33 kHz
Carrier frequency
36 kHz 38 kHz
40 kHz
56 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
Best choice for
LEGACY, FOR LONG BURST REMOTE CONTROLS RECOMMENDED FOR LONG BURST CODES
(AGC2)
(AGC4)
TSOP58230
TSOP58430
TSOP58233
TSOP58433
TSOP58236
TSOP58436 (1)(2)(6)
TSOP58238
TSOP58438 (3)(5)(9)(10)
TSOP58240 (11)
TSOP58440
TSOP58256 (7)
TSOP58456 (4)(8)
Minicast
1 = OUT, 2 = GND, 3 = VS 5.0 W x 6.95 H x 4.8 D
Leaded
Remote control
(1) Panasonic (2) RC5 (3) NEC (4) RCA (5) Mitsubishi (6) RC6 (7) Cisco (8) r-step (9) Sejin 4PPM (10) Sharp (11) Sony
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage
VS
-0.3 to +6
V
Supply current
IS
5
mA
Output voltage
VO
-0.3 to 5.5
V
Voltage at output to supply
VS - VO
-0.3 to (VS + 0.3)
V
Output current
IO
5
mA
Junction temperature
Tj
100
°C
Storage temperature range
Tstg
-25 to +85
°C
.