Photocouplers Infrared LED & Photo Transistor
TLP184(SE
TLP184(SE
1. Applications
• Programmable Logic Controllers (PL...
Photocouplers Infrared LED & Photo
Transistor
TLP184(SE
TLP184(SE
1. Applications
Programmable Logic Controllers (PLCs) Private Branch Exchanges (PBXs)
2. General
The TLP184(SE is a AC input type photocoupler that consist of a photo
transistor optically coupled to two infrared LED. The TLP184(SE is housed in the very small and thin SO6 package, it has a high noise immunity and a high isolation voltage. Since the TLP184(SE is smaller than DIP package, it's suitable for high-density surface mounting application such as Hybrid ICs.
3. Features
(1) Collector-emitter voltage: 80 V (min) (2) Current transfer ratio: 50% (min)
Rank GB: 100% (min) (3) Isolation voltage: 3750 Vrms (min) (4) Operating temperature: -55 to 110 (5) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan and Thailand Factory
Note 1: When a VDE approved type is needed, please designate the Option (V4).
4. Packaging and Pin Assignment
11-4M1S
©2015-2019 Toshiba Electronic Devices & Storage Corporation
1
1: Anode, Cathode 3: Cathode, Anode 4: Emitter 6: Collector
Start of commercial production
2013-01 2019-11-18
Rev.7.0
5. Principle of Operation 5.1. Mechanical Parameters
TLP184(SE
Characteristics
Creepage distances Clearance Internal isolation thickness
Min
Unit
5.0
mm
5.0
0.4
6. Absolute Maximum Ratings (Note) (Unless otherwise speci...