Inductors
www.vishay.com
IHLP-2525CZ-1A
Vishay Dale
IHLP® Automotive Inductors, Low DCR Series
DESIGN SUPPORT TOOLS click logo ...
Description
www.vishay.com
IHLP-2525CZ-1A
Vishay Dale
IHLP® Automotive Inductors, Low DCR Series
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
Design Tools Available
STANDARD ELECTRICAL SPECIFICATIONS
L0 INDUCTANCE
DCR
± 20 % AT 100 kHz, TYP.
0.25 V, 0 A
25 °C
(μH) (m)
DCR MAX. 25 °C (m)
HEAT RATING CURRENT DC TYP.
(A) (1)
SATURATION CURRENT DC TYP. (A) (2)
1.0
7.6 8.0
12.5
9.5
2.2
15.7 16.5
9.0
7.0
3.3
24.8 26.0
7.0
6.5
4.7
31.8 33.4
6.0
4.0
6.8
44.6 46.8
5.5
4.0
8.2
52.3 54.9
5.0
4.0
10
67.8 71.2
4.0
3.5
22
128.9 135.0
2.9
2.5
Notes
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +125 °C
The part temperature (ambient + temp. rise) should not exceed 125 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application
Rated operating voltage (across inductor) = 50 V (1) DC current (A) that will cause an approximate T of 40 °C (2) DC current (A) that will cause L0 to drop approximately 20 %
FEATURES Shielded construction Frequency range up to 1.0 MHz Lowest DCR/μH, in this package size Powered iron composition provides soft
saturation Handles high transient current spikes without
hard saturation Ultra low buzz noise, due to composite construction AEC-Q200 qualified IHLP design. PATENT(S): www...
Similar Datasheet