Sensor Signal Conditioner
Data Sheet
Rev. 1.11 / June 2011
ZSSC3008
Sensor Signal Conditioner with Diagnostics
ZSSC3008
Sensor Signal Conditioner...
Description
Data Sheet
Rev. 1.11 / June 2011
ZSSC3008
Sensor Signal Conditioner with Diagnostics
ZSSC3008
Sensor Signal Conditioner with Diagnostics
Brief Description
The ZSSC3008 is a sensor signal conditioner IC that is adjustable to nearly all piezo-resistive bridge sensors. Measured and corrected bridge values are provided at the SIG™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output.
The digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3008 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSSC3008 particularly well-suited for automotive applications.*
Features
Digital compensation of sensor offset, sensitivity, and non-linearity
Programmable analog gain and digital gain; ...
Similar Datasheet